Your Cart is Empty
- Home
- About us
- Connectors
- Hardware
- Harnessing
- Professional Tooling
- Race Spec Products
- Tefzel Wire
- Used & Clearance
- 1-855-303-0030
- Login
Available for Honda OBD1, OBD2 A/B, and K-Series - perfect for custom adapter harnesses. Please select your application from the drop down.
30mm adhesive decals for the MSEL rotary dials. Includes 6 different colour options in two variants, 0-9 and +/- 4.
T1 aluminum block plugs, M28 to -10 adapter. These block plugs thread into the OEM drain back galleys on B series motors. Sold as a pair. These are perfect for those of you that are building your own breather kits....
Honda C101 Plug Connector Kit Includes Housing (5) Large Terminals (16) Small Terminals Genuine housing and terminals Fits OBD1-OBD2 Honda/Acura
Walbro 400LPH NON E85 Install Kit (for 262 pumps), formerly 400-0001This kit includes the following: fuel strainer Fuel hose Harness pigtail 2 clamps Wire Connectors This kit is for use with, but not limited to,...
A lot of people are using OEM RDX injectors on their low budget street setups these days but because they have a 14mm top they will not fit into the typical B, D or H series 11m fuel rail as...
Minature reflector nozzle for use with the HG 2620E.May not be compatible with other heat guns.
Walbro 400LPH E85 Compatible Install Kit This kit includes the following: fuel strainer Fuel hose Harness pigtail 2 clamps Wire Connectors This kit is for use with, but not limited to, the new Walbro 400/416lph (267/274/285) E85 compatible pumps. This...
Highly efficient reflector nozzle for use with the HG 2620E featuring a 50x35mm opening and perforated base.May not be compatible with other heat guns.
This is the Straight Tube fitting we use in our EMAP Kits. Will fit a 3/16' OD Tube, is made of brass and the other end is 1/8" NPT male threads.
Syvecs GPS Module Connector kit Includes Housing Lock (19) Terminals for 22-16AWG wire Fits Syvecs GPSBT 100Hz IMU Module
Volkswagen / Audi Connector Kit Includes Housing (4) Terminals for 24-22AWG wire (3) Seals Fits Audi R8 Fuel sending unit
Toyota 2-Position Connector Kit Includes Housing (3) Terminals (2) Seals Fits Toyota 2JZ Ref (Crank) & Sync (Cam) Sensors
This item is a 54" long (3/16" ID) turbo oil feed line with 1/8" NPT male fittings on both ends of the line. Additional fittings may be required to attach this line to your turbo.
Fitting used to adapter M10x1.0 pressure sensors to an 1/8" NPT male thread. Female side of the fitting is M10 x 1.0 and the male side is 1/8" NPT
This item is a 42" long (3/16" ID) turbo oil feed line with 1/8" NPT male fittings on both ends of the line. Additional fittings may be required to attach this line to your turbo.
Degree wheels are IN STOCK!!! This custom designed Mike Belben Degree Wheel is indexed in BOTH directions so it will work with motor that spin clockwise and counter clockwise.
BRASS VACUUM BARB ADAPTER KITUsed with GVM100 Vacuum Manifolds KIT INCLUDES: One 3/8" Nylon Tee-Six Brass - 1/8" pipe thread by 3/16" barbed adapters
Honda C101 Receptacle Connector Kit Includes Housing (5) Large Terminals (16) Small Terminals Genuine housing and terminals Fits OBD1-OBD2 Honda/Acura
Panel mount USB 3.0-A to flying lead cable commonly used as a comms provision for USB based devices. All USB Comms cables now come with Dust Covers included. Cable Length: 2MWire Gauge: 28USB 3.0
MoTeC LPS Ball End Adapter Suits MoTeC and many other brand linear position sensors Adapts a standard linear positions sensor (LPS) to mount with a pivoting stud and nut instead of the spherical adapter they are supplied with
This is the Copper Tubing we use in our EMAP Kits. 3/16' OD Tube, is made of copper and is sold by the foot.
Toyota Temperature Sensor Connector Kit Includes Housing (3) Terminals (2) Seals Fits Toyota 2JZ Coolant Temperature Sensor
Toyota TPS Connector Kit Includes Housing (5) Terminals (4) Seals Fits Toyota 2JZ Throttle Position Sensor
Polyurethane Foam 'Clean Room' Swab with a 1/8" Tip, 2 3/4" Overall Length - perfect for epoxy work. Ditch those Q-Tips, those are for your ears - not your looms. Sold in packs of 10pc.
Textalu® 1202 is an insulative fiberglass sleeving with a heavy aluminum coating designed to protect components in high temperature areas. It provides superior insulation to components that must maintain stable temperatures to assure performance efficiency. Specifications Non flammable, Type A...
This is a braided teflon hose with two black AN-6 female ends, used between the oil sandwich plate adapter and the AN-6 head adapter.
• Necessary INLET flange for use with PTE’s V-Band inlet/outlet turbine housing • Manufactured from stainless steel construction for exceptional durability Why bother with cheaper quality flanges that may crack or not seal correctly? Trust Precision to correctly supply the...
M22759/16 Tefzel Wire Specific designation of MIL-Spec wire commonly used in motorsport Available in 2-10AWG Conductor Tinned Copper Temperature Rating 150°C Insulation Ethylene Tetrafluoroethylene (ETFE) Insulation Thickness .013" Minimum Insulation Resistance 3,000 megohms for 1000 ft Minimum Voltage Rating 600 Volts Impulse Dielectric Test 100% test, 8.0 kV...
Receptacle connector kit to mimic the factory injector connection on 2012+ Honda Civic SI Includes (4) Housings (4) Retainers (9) Terminals (8) Seals Great to be used with adapter harnesses. This kit is comprised of aftermarket components for the housing and...
These are replacement nuts for our Rear Wheel Speed Sensors Sold as a set of 2
PVC-based round lacing cord to be used as a bundle tie. Specifications Material PVC Cord Color Black Tensile Strength 11kg Width .75mm Length 25m Part # RS PRO 554 080
Features Single Pole, Single Throw Qualified to MIL-S-3950 Environmentally Sealed Operating Temperature -65° to 71°C (-85° to 160°F) Rated to 15A @ 28VDC UL Recognized, CSA Certified CE Approved
Kaizen Solid State Relay - DISCONTINUED 2026 The highest current capacity solid state relay on the market, intended for PWM use with inductive loads Over current and over temperature protection Rated to 40A Capable of high frequency switching at full...
Our signature DIY switch panel (no wiring) for triggering any relay in your car. Includes RaceSpec Switch Panel Plate USB Type B Female Bulkhead to Type B Male Cable Momentary Starter Switch with Cover 5 SPST Switches rated to 15A...
Knipex ESD Super Knips® Part Number 78 03 125 ESD Professional flush cutter Features a comfort grip and ESD handle Mirror polish for rust protection Precise cutting of the thinnest wires and components 54 HRC hardness 125mm Length One of our...
Bosch Motorsport Tooling Bundle Includes 1 928 498 837 Frame for interchangeable Bosch die sets 1 928 498 838 Die (Bosch BTC/BTL 1.5) 1 928 498 840 Die (Bosch BTC/BTL 2.8) 1 928 498 841 Die (Bosch BTC/BTL 4.8) Bosch's...
Kaizen Relay Control Module for controlling Kaizen Relays DISCONTINUED 2026 Never before has this level of control been made available in such a small and inexpensive package! The Control Module is the brain for up to three Kaizen Relays and is...
Amphenol Radlok connectors offer a cost effective method to pass through heavy gauge wire through a firewall or panel.Kit Contents Bulkhead connector 5.7mm Radlok™ Stud (engine side) M6 threaded stud (chassis side) allows for easy power distribution Includes gasket Quick...
NOTE: These are not sold through our web-store. We are a master authorized MoTeC dealer and will be happy to provide any information needed if you’re interested in purchasing any MoTeC ECUs, PDMs, Displays, etc. Please contact us at sales@racespeconline.com. Outputs...
A great starter set including our original three Race Spec® branded PEW12, exclusive die sets, a third that you'll need regularly, all with a case with foam cutouts and room to grow!Includes: Race Spec® | Rennsteig PEW12 Race Spec® |...
NOTE: These are not sold through our web-store. We are a master authorized MoTeC dealer and will be happy to provide any information needed if you’re interested in purchasing any MoTeC ECUs, PDMs, Displays, etc. Please contact us atsales@racespeconline.com. Outputs 4...
Rennsteig Crimp Tool - PEW12 Part Number 624 000 3 RT Crimp frame without dies and locator Individual parts are sold separately to suit your specific needs This Rennsteig crimp tool combines full features, high precision, and top German build quality...
This Raychem Splice Crimp Tool is a great alternative to the DMC GMT232, suits the following Raychem splices and Raychem butt splices: D-609-03D-609-04D-609-05D-609-06D-609-07D-609-08
Rennsteig Bosch BDK 2.8 / BMK 0.6 Die Set Part Number 624 1039 3 0 RT Compatible with the PEW12 Crimp Tool Cable Range 0.50 - 0.75 SQ-MM Suits Bosch BDK 2.8 Terminals 1 928 498 055 1 928 498 057 1...
